|
|
|
RKI Eagle 2 6 Gas Sample Drawing Monitor Download printable brochure
|
|
RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field
proven sensors. The EAGLE 2 now includes PID (Photo Ionization Detector) capability. Conversion factors for a variety of common gases are programmed into the EAGLE 2 for both the PID sensor and LEL/PPM catalytic sensor.
Made in U.S.A.
|
Features
- TEST Monitor up to 6 different autoranging gases
- PPM / LEL hydrocarbon detection
- PID (Photo Ionization Detector) low and high range for VOC detection
- Infrared Sensors available for CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
- TC (Thermal Conductivity) sensor available for % Vol. H2 or % Vol. CH4 Plug and play, smart toxic sensors
- Hundreds of configurations
- Displays in 5 languages
- Powerful long-life pump up to 125’ range
- Low flow pump shut off and alarm
- Methane elimination for environmental use
- Alkaline 18 hours or Ni-MH 20 hours capability
- Password protection
- Datalogging standard
- IrDA communications port
- Autocalibration/ single gas calibration
- Internal hydrophobic dust filterExternal probe with hydrophobic filter
- Ergonomic RFI / EMI / chemical / weather resistant enclosure
- Intrinsically safe design, CSA approval
|
|
|
Specifications
|
Enclosure
|
Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP65.
|
|
Dimensions
|
9.5” L x 5.25” W x 5.875” H
|
|
Weight
|
3.8 Lbs (standard 4 gas with batteries)
|
|
Detection Principle
|
Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
|
|
Sensor Life
|
2 Years under normal conditions.
|
|
Sampling Method
|
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
|
|
Display
|
3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
|
|
Language
|
Readout can display in 5 languages (English, French, German, Italian, or Spanish.
|
|
Alarms
|
2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
|
|
Alarm Method
|
Buzzer 95 dB at 30 cm, four high intensity LED’s.
|
|
Controls
|
4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
|
|
Continuous Operation
|
At 70°F, 18 hours using alkaline batteries, or 20 hours using Ni-MH.
|
|
Power Source
|
4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
|
|
Operating Temp. & Humidity
|
-20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
|
|
Response Time
|
30 Seconds to 90% (for most gases) using standard 5 ft hose.
|
|
Safety Rating
|
Intrinsically Safe, Class I
Groups A, B, C, D.
Approvals: CSA / CE
|
|
Standard Accessories
|
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
|
|
Optional Accessories
|
- Dilution fitting (50/50)
- Ni-MH batteries
- Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours)
- Continuous operation adapter, 115 VAC or 12 VDC
- Extension hoses
|
|
Warranty
|
Two year material and workmanship, one year for PID sensor
|
|
|
|
Gases & Detectable Ranges
The EAGLE 2 can be configured with up to 6 gas sensors from the list below.
|
Standard Confined Space Gases
|
|
Gas
|
Measuring Range
|
Accuracy
(whichever is greater)
|
|
Hydrocarbons (CH4, std)
|
0 - 100% LEL
|
± 5% of reading or
± 2% LEL (*)
|
|
0 - 50,000 ppm
|
± 50 ppm or
± 10% of reading (*)
|
|
Oxygen (O2)
|
0 - 40% Vol.
|
0.5% O2
|
|
Carbon Monoxide (CO)
|
0 - 500 ppm
|
± 5% of reading or
± 5 ppm CO (*)
|
|
Hydrogen Sulfide (H2S)
|
0 - 100 ppm
|
± 5% of reading or
± 2 ppm H2S (*)
|
|
Toxics
|
|
Ammonia (NH3)
|
0 - 75 ppm
|
± 10% of reading or
± 5% of full scale (*)
|
|
Arsine (AsH3)
|
0 - 1.5 ppm
|
|
Chlorine (Cl2)
|
0 - 3 ppm
|
|
Hydrogen Cyanide (HCN)
|
0 - 15 ppm
|
|
Phosphine (PH3)
|
0 - 1 ppm
|
|
Sulfur Dioxide (SO2)
|
0 - 6 ppm
|
|
IR Sensors
|
|
Carbon Dioxide (CO2)
|
0 - 10,000 ppm
0 - 5% Vol.
0 - 60% Vol.
|
± 5% of reading or
± 2% of full scale (*)
|
|
Methane (CH4)
|
0 - 100% LEL
0 - 100% Vol.
|
|
Hydrocarbons
|
0 - 100% LEL
0 - 30% Vol.
|
|
PID Sensors
|
|
VOC
|
0 - 2,000 ppm
0 - 50 ppm
|
—
|
|
TC Sensors
|
|
Methane (CH4)
|
0 - 100% Vol.
|
± 5% of reading or
± 2% of full scale (*)
|
|
Hydrogen (H2)
|
0 - 10% Vol.
0 - 100% Vol.
|
Special Features
|
- Low flow alarm shuts pump off to avoid damage to instrument.
- Hydrophobic filter disc in probe.
- Internal hydrophobic filter.
- Single gas calibration capability.
- Methane elimination feature for environmental applications.
- Security Password protected.
- Meets EPA Method 21 protocol for fugitive emissions testing (most applications).
- Plug and play toxic sensors.
- Datalogging available for all configurations.
- Transformer gas testing version available.
|
Specifications subject to change without notice.
|
|
|
