|
|
|
LAND Analyzers
|
|
LAND, an AMETEK Company, designs and manufactures a range of gas analyzers for monitoring combustion efficiency, pollutant emissions, opacity, dust and particulate matter concentration, coal fire detection and gas turbine blade temperatures.
|
|
|
Cross Stack In Situ Carbon Monoxide Monitor Download printable brochure.
Series 9000 cross stack infrared, in situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler
system.
Product Range
Model 9100 Carbon Monoxide Monitor
Model 9200 MkII High Performance Carbon Monoxide Monitor
Features and Benefits
-
Direct continuous measurement of carbon monoxide
-
True representative measurement - reading averaged across entire duct
-
Improved combustion control and efficiency savings
-
Low running and maintenance cost
-
High reliability - robust design
-
Simple installation - advanced alignment features
-
Over 20 years of experience in carbon monoxide monitoring - 4th generation product
The 9200 MkII has all the facilities of the 9100 with the addition of:
-
Clear stack, open path gas calibration
-
Automatic cell leak detection
-
4 gas cell, TUV approved measurement technique
-
Automatic duct pressure correction
Applications
-
Boiler combustion efficiency
-
Low NOx burner performance
-
Burner performance monitoring
-
Process control
-
Precipitator protection
-
Monitor boiler erosion
|
|
|
Cross Stack In-Situ Carbon Monoxide Monitor
Simple installation and setup
The Series 9000 has a transmitter and receiver unit only - no additional interface or calibration boxes are required; All it requires is installation and mains power supplying. Setup, and in particular alignment could not be simpler - the transmitter has a signal strength indicator to achieve the best measurement performance.
The Model 9100 has the accuracy and repeatability of an environmental analyzer and the simplicity and reliability of a combustion process monitor.
|
Specifications
|
|
|
Measuring
|
Cross Stack, In-Situ
|
|
Technique:
|
Infrared Gas Cell Correlation Technique with Automatic: Cell Leak Detection (9200 Mk II only)
|
|
System Performance
|
|
Measuring Range:
|
0 - 1000 ppm.m
Other ranges selectable from the keypad
|
|
Pathlength:
|
1.6 to 32 st / 0.5 to 10 m
|
|
Linearity:
|
Model 9100: +3 % of range Model 9200MkII: +2 of range
|
|
Resolution:
|
1 ppm
|
|
Environmental
|
|
Flue gas temperature range:
|
Up to 700º F / 370º C
|
|
Environmental rating:
|
IP65 / NEMA 4
|
|
Inputs/Outputs
|
|
Flue Gas temperature input:
|
Thermocouple, Type K Chromel/Alumei input into the transmitter unit or 4 - 20 mA temp. input
|
|
Serial Interface:
|
Isolated RS232 or RS485 communication (Modbus) for: CO concentration, Status, Signal strength, Initate check cycle Diagnostic data.
|
|
Current loop (analog) outputs (2):
|
0, 2, 4, 10 - 20 mA user configurable for track or hold
|
|
Relay outputs (3):
|
Independently configurable as System OK, Maintenance, or Alarm (High or Low)
|
|
Options
|
Air mover assembly for air purge
Air purge blower unit
Transfer/Adapter Flanges
Flue gas thermocouple with current loop transmitter
|
|
|
|
Ametek Main Page - Land - Thermox - Western Research - Process Instruments - Dycor - Chandler
|
|
|
