|
|
|
|
|
Thermox analyzers from Ametek are among the most established combustion monitoring and control devices available today. A broad range of products is available for analyzing oxygen, combustibles, and methane in combustion flue gases for combustion control, safety, and thermal NOx reduction. Industries served include Electric Power Generation, Petroleum Refining, Petrochemical Processing, Cement & Lime Manufacturing, Glass and Ceramics,
Pulp & Paper, Iron & Steel, and Non-Ferrous Metals production.
|
|
Link Bus Remote Instrument Monitoring System
Link Bus (RIMS) Download printable brochure
The LinkBus Remote Instrument Monitoring System (LinkBus RIMS) from AMETEK addresses the limitations of traditional maintenance programs and frees up resources, making them available to give attention where it is most needed. Maintenance and performance personnel now have easy access to all the analyzers’ vital signs from their desk computer or through the DCS, not just the measured parameter that is typically delivered to the process control room. Any analyzer can be interrogated from the PC or through the DCS operating under HART™, Fieldbus FOUNDATION™, Modbus™ protocols, and information may be gathered without having to go to the location. This data provides predictive maintenance intelligence and assists the maintenance personnel in effective repair planning. There is no need to climb up to the analyzer, declassify the area, issue work permits, or even visit the shelter to obtain this critical performance data.
|
|
|
|
Specifications
|
|
Diagnostics:
|
Watchdog Timer
Service Alarm (trouble alarm)
|
|
RS-485 (Analyzer) Port
|
Supports up to 16 devices
|
|
Distance:
|
4000 feet (1200 m) max.
|
|
Media:
|
single shielded, twisted-pair,18-24 AWG
|
|
Network Ports
|
|
|
Ethernet:
|
IEEE 802.3 10/100 Base-T, auto-sensing
|
|
Media:
|
Category 5e UTP or STP (recommended)
|
|
|
Foundation Fieldbus H1
|
|
Protocols Supported:
|
HTTP (web pages)
FTP (software updates)
SMTP (e-mail)
POP3 (e-mail)
|
|
Modbus
|
|
Foundation Fieldbus
|
|
Browsers Supported:
|
Microsoft Internet Explorer V5.0 or higher, Netscape Communicator V4.73 or higher
|
|
Power Requirements:
|
100-240 VAC, 50/60 Hz
Alarm Contacts (4) 1 Amp at 24 VDC or .5 Amp at 125 VAC, noninductive load (1) contact configured for system alarm
|
|
Environment
|
|
Ambient
Temperature:
|
32°F to 122°F (0°C to 50°C)
|
|
Relative Humidity:
|
10% to 80%, non-condensing
|
|
IEC Installation:
|
Category II
|
|
IEC Pollution:
|
Degree 2
|
|
Enclosure:
|
Indoor/outdoor use UL Type 4X and IP65 Hazloc. This device is for use only in General Purpose Areas
|
|
Display Information for Each Analyzer
|
Gas concentration for each measured species Alarm status, Principal diagnostic parameters, Actual parameters vary depending on the capabilities of the supported analyzers
|
|
Security:
|
Password protection to prevent unauthorized access to parameters and settings.
|
|
|
|
Ametek Main Page - Thermox - Western Research - Process Instruments - Dycor - Land - Chandler - Trace Analytical
|
|
|
