|
Accessories
- Multipoint sequential sample system
- Control system with advance PLC controller
- Accessories for sensors – prevent dust and water, calibration adaptors
- Remote alarm stations
|
|
|
Draeger FS-10
The Draeger FS-10 is a test torch capable of function testing the Draeger Flame 1300 IR Detector, Draeger Flame 1700 UV Detector, and Draeger Flame 2300 UVIR Flame Detector in hazardous areas.
The Draeger FS-10 tests Draeger Flame Detectors at distances up to five meters. The Draeger FS-10 is portable, batterypowered, and certified for use in potentially explosive atmospheres.
The Draeger 1300, 1700 and 2300 Flame Detectors respond to infrared and/or ultraviolet flickering radiation emissions. Accordingly, the Draeger FS-10 uses a xenon lamp to emit a powerful beam of broad-spectrum radiation. It is pulsed in a pseudo-random sequence to simulate the varying emission of a flame. Download brochure
|
|
|
Draeger FS-5000
The Draeger FS-5000 is used to simulate the presence of fire or flames to test the correct operation of the Draeger Flame 5000 CCTV Detector. The Draeger Flame 5000 CCTV Detector is a ‘Visual Flame Detector’; therefore the Draeger FS-5000 has been specifically designed to enable long range testing of this detector. The Draeger FS-5000 is designed and built for extreme offshore environmental conditions. The electronics are housed in an
enclosure which is designed for Zone 1 hazardous areas. Download brochure
|
|
|
Draeger PSD 3000
The Draeger PSD 3000 is a sampling unit for continuous sampling of gas/air mixtures. In combination with Draeger Gas Transmitter, a remote sampling system can be designed for gas monitoring.
The internal vibrating diaphragm pump has a superior life expectancy, due to the lack of moving parts. An electronic circuit monitors the flow rate internally and advises if the flow rate in the input line falls below a predefined minimum threshold. The device offers a flexible programmable massaging of the low-flow signal to the central controller. The Draeger PSD 3000 can be used for most industrial gases. Download brochure
|
|
|
Remote Alarm Stations
The Draeger remote alarm stations are a great enhancement to any gas detection system. The alarm station acts as a stand along control system and provides the user with both audible and visual alerts. It‘s NEMA 4 rating makes it suitable for indoor and outdoor use. Download brochure
|
|
|
Draeger Main Page -
Intrinsically Safe and General Purpose Transmitters - Explosion Proof Transmitters
Flame and Open Path Transmitters - Control Systems - Stationary Gas Sensors - Calibration Gases
|
